MAXDATA PLATINUM 200 I User Manual download pdf (Page 15)

14 15MAXDATA PLATINUM 200 IInstalling and Replacing Board Components

Installing Memory

The board has four 240-pin DIMM sockets arranged as DIMM 0 and DIMM 1 in both Channel A and

Channel B, as shown in Figure 3.

CAUTION

To be fully compliant with all applicable SDRAM memory specifications, the board requires DIMMs

that support the Serial Presence Detect (SPD) data structure.

Guidelines for Dual Channel Memory Conﬁguration

Before installing DIMMs, read and follow these guidelines for dual channel configuration.

Two or Four DIMMs

Install a matched pair of DIMMs equal in speed and size (see Figure 10) in DIMM 0 (blue) of both

channels A and B.

Channel A

1 GB, 400 MHz DIMM 0

DIMM 1

Channel B

1 GB, 400 MHz DIMM 0

DIMM 1

If additional memory is to be used, install another matched pair of DIMMs in DIMM 1 (black) in both

channels A and B (see Figure 11).

Channel A

256 MB, 400 MHz DIMM 0

512 MB, 400 MHz

DIMM 1

Channel B

256 MB, 400 MHz DIMM 0

512 MB, 400 MHz

DIMM 1

Figure 10. Dual Configuration Example 1

Figure 11. Dual Configuration Example 2

Figure 8. Install Processor

Figure 9. Close the Load Plate

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

No comments

MAXDATA PLATINUM 200 I User Manual Page 15